🏠 ATE MAX – Anti-Damp Device for Damp Walls
Premium solution against dampness and rising damp
ATE MAX Light Grey is a high-power electromagnetic device designed to effectively dry damp walls — even in large buildings, older homes, or highly exposed areas. Thanks to electromagnetic wall drying, it acts directly at the root of the problem, without any chemical products.
With a 30-metre operating radius (60 m diameter), this model is perfectly suited to the most complex dampness situations.
Model documentation · ATE MAX
English version · PDF
For contractors and resellers
Video in English
⚙️ How it works
Damp walls naturally generate an electrical potential difference that causes water to rise from the ground. It emits a very low-frequency electromagnetic field that reverses the polarity of water molecules within porous materials (brick, stone, etc.).
→ This polarity change forces moisture to move back down by gravity towards the foundations.
✔️ The process is continuous, silent, and non-invasive.
✅ Key benefits of ATE MAX
-
📏 Wide coverage: 30 m radius (60 m diameter)
-
🔇 Silent operation — no vibration, no maintenance
-
⚡ Ultra-low consumption: 0.75 W (~€15/year)
-
🧱 Building-friendly — suitable for fragile or older walls
-
🌿 Passive technology — chemical-free (note: “passive” may be debatable since it’s powered at 12 V)
-
🇫🇷 Made in France — 10-year manufacturer’s warranty
-
🚚 Free and fast delivery
-
✅ Compliant with European standards (EMF, RoHS, EMC)
📦 Technical specifications
-
Dimensions: 322 × 232 × 32 mm
-
Power supply: 12 V
-
Consumption: 0.75 W
-
Coverage: 60 m diameter
-
Installation: fix only to a damp load-bearing wall
Certifications:
-
Low Voltage Directive 2014/35/EU
-
EMC Directive 2014/30/EU
-
RoHS Directive 2011/65/EU
-
WEEE Directive 2012/19/EU
-
EMF testing (non-harmful waves — Emitech tests)
🎯 Expected results
With correct installation and by following the recommendations, drying results are generally visible between 18 and 24 months, depending on the building’s structure and the level of dampness.
🛠️ Installation recommendations
-
📍 Height: install between 30 and 100 cm above the floor
-
📏 Distance: at least 1.50 m from any electronic device
-
🧱 Surface: load-bearing damp wall only (never on a partition wall or lining)
-
🖼 Mounting: like a wall frame — do not move after installation
-
⚡ Power: must remain plugged in permanently (very low consumption)
💡 Tips for optimal drying
-
🔧 Remove waterproof coatings: scrape 10 to 20 cm above the affected area to let the wall breathe
-
💨 Ensure good ventilation: MVHR/VMC, air vents, doors trimmed by 1.5–2 cm
-
🧱 Restore walls after drying: brush off surface salts, then apply a lime render with an anti-salt additive
-
🌧 Add drainage if needed: in case of lateral infiltration or water pressure
⚠️ Note
It is designed to treat rising damp.
It does not replace treatments for:
-
❌ Active water infiltration
-
❌ Flood-related damage
-
❌ Visible mould problems
➡️ These cases require additional solutions.
Frequently asked questions about ATE MAX
What type of damp is ATE MAX intended for?
ATE MAX is an electromagnetic device offered for walls affected by identified rising damp. It does not replace repairing a leak, addressing water ingress or resolving condensation.
What does the stated 60 m diameter mean?
The manufacturer states a coverage diameter of 60 m, equivalent to a 30 m radius around the device. This is not a floor area in square metres. Consider the distances to the affected walls and the layout of the building.
Does ATE MAX need electricity?
Yes. ATE MAX uses the power supply specified by the manufacturer and must remain powered as instructed in its manual.
How should I prepare to install ATE MAX?
Read the manual for ATE MAX before installation. It explains the mounting surface, positioning and precautions. Use fixings suitable for the wall and follow the manufacturer’s instructions.
How does it differ from the other models?
ATE devices use mains power; ATG geomagnetic devices operate without electricity. Stated ATE coverage diameters are 15 m for LC15, 30 m for LC30 and LC30 PULSE, and 60 m for MAX. Compare the specifications and manual for each model.
Where can I find the ATE MAX manual and specifications?
The English manual for ATE MAX is linked below. Also check the product reference and finish on the shop page before ordering.
| Weight | 2 kg |
|---|







