🏠 ATE LC30 Light Grey – Electromagnetic device for drying walls
A durable solution against rising damp
Wall dampness often comes from rising damp, a natural phenomenon where groundwater rises through porous materials such as brick or stone. This issue affects both older and newer buildings, leading to mould, visible deterioration, poor insulation, and discomfort.
It is an electromagnetic wall drying device designed to dry damp walls without chemicals. It offers a gradual drying method that is respectful of materials.
Model documentation · ATE LC30
English version · PDF
For contractors and resellers
Video in English
⚙️ How ATE LC30 works
Each wall generates a natural electrical potential with the ground, which promotes water rising. It acts directly on the root cause by emitting very low-frequency electromagnetic pulses that reverse the polarity of water within the walls.
Water molecules are then redirected back towards the ground and gradually evaporate, enabling durable drying without damaging the structure.
✅ Benefits of ATE LC30
-
📏 Operating radius: 15 m (30 m diameter)
-
🔇 Silent, vibration-free, maintenance-free
-
⚡ Very low consumption: 0.75 W (~€15/year)
-
🧱 Easy installation: mounted on the wall like a picture frame
-
🧘♂️ Safe for people, animals and plants
-
📜 Certified device: RoHS, EMC, EMF, WEEE
-
🇫🇷 Made in France – 10-year manufacturer’s warranty
-
🚚 Fast and free delivery
🔬 Technical specifications
-
Dimensions: 322 × 232 × 32 mm
-
Power supply: 12 V
-
Coverage: 15 m radius (30 m diameter)
-
Consumption: 0.75 W
-
Certifications: Low Voltage 2014/35/EU, EMC 2014/30/EU, RoHS 2011/65/EU, WEEE 2012/19/EU, EMF wave safety (Emitech)
💡 Using ATE LC30
It is a non-invasive solution for rising damp. It gradually pushes moisture back towards the ground, allowing walls to dry while preserving the structure and indoor comfort.
Expected results: complete drying within 18 to 24 months depending on configuration and installation. (note: “complete” is a strong claim)
🛠️ Installation tips
-
Positioning: 30 cm to 1 m above the floor on a damp load-bearing wall, never on lining (drywall, insulation, etc.).
-
Distance: minimum 1.5 m from electronic or electrical devices.
-
Mounting: hang like a picture frame and do not move after installation.
-
Power: plugged in continuously, low consumption.
✅ Tips for optimal drying
-
Remove waterproof coatings 10–20 cm above damaged areas.
-
Ensure good ventilation (MVHR/VMC, window vents, properly adjusted doors).
-
After drying, brush off surface salts and apply a lime render with an anti-salt additive.
-
Install drainage if lateral infiltration is related to hydrostatic pressure.
⚠️ Important information
Results depend on thickness, material, coatings, and following the instructions.
The device does not replace treatments for:
-
Active water infiltration
-
Flooding
-
Existing mould
➡️ These issues must be treated separately to ensure durable drying.
Frequently asked questions about ATE LC30
What type of damp is ATE LC30 intended for?
ATE LC30 is an electromagnetic device offered for walls affected by identified rising damp. It does not replace repairing a leak, addressing water ingress or resolving condensation.
What does the stated 30 m diameter mean?
The manufacturer states a coverage diameter of 30 m, equivalent to a 15 m radius around the device. This is not a floor area in square metres. Consider the distances to the affected walls and the layout of the building.
Does ATE LC30 need electricity?
Yes. ATE LC30 uses the power supply specified by the manufacturer and must remain powered as instructed in its manual.
How should I prepare to install ATE LC30?
Read the manual for ATE LC30 before installation. It explains the mounting surface, positioning and precautions. Use fixings suitable for the wall and follow the manufacturer’s instructions.
How does it differ from the other models?
ATE devices use mains power; ATG geomagnetic devices operate without electricity. Stated ATE coverage diameters are 15 m for LC15, 30 m for LC30 and LC30 PULSE, and 60 m for MAX. Compare the specifications and manual for each model.
Where can I find the ATE LC30 manual and specifications?
The English manual for ATE LC30 is linked below. Also check the product reference and finish on the shop page before ordering.
| Weight | 1.4 kg |
|---|







