🏠 Wall drying – ATG LC30 White – Anti-Damp Device for Damp Walls
A natural solution against rising damp – No electricity, no maintenance
ATG LC30 is an innovative geomagnetic device designed to effectively treat wall dampness, particularly rising damp.
This natural phenomenon occurs when water in the ground rises through porous materials such as brick or stone. It acts at the source of the problem by emitting a passive geomagnetic field that reverses the polarity of the water — with no electricity, batteries, or maintenance.
Model documentation · ATG LC30
English version · PDF
For contractors and resellers
Video in English
✅ Main features:
-
📏 Operating radius: 15 metres (30 m diameter)
-
🧲 Passive geomagnetic technology
-
📡 No emission of electromagnetic waves
-
🔌 No wiring, no battery, no energy consumption
-
🛠️ Quick and easy installation
-
🧱 Wall mounting recommended (adhesive or glue)
-
🇫🇷 Made in France – 10-year warranty
🧱 Benefits of the geomagnetic ATG LC30
-
✅ Effectively stops rising damp at the source
-
✅ Preserves walls, ceilings, floors, paintwork, and wooden flooring
-
✅ Compatible with all types of buildings (homes, basements, garages, churches, etc.)
-
✅ Improves thermal comfort and reduces heating bills
-
✅ No technical intervention required — simply install the device and follow the instructions
📌 Best practices for maximum effectiveness
🛠️ Installation on a shelf or inside a piece of furniture (under certain conditions)
This device can be placed on a shelf or inside a closed unit (wardrobe, cupboard) on the ground floor, under these conditions:
-
The support must be stable and secured to prevent any movement
-
The device must be firmly fixed with strong double-sided tape or a stable base
-
Position it between 1.50 m and 2.00 m above the floor
-
At least 1.50 m away from any electrical source (excluding standard sockets)
-
Oriented towards magnetic north (compass or app)
📌 Once installed, the device must not be moved.
👉 It is not necessary to place it directly on a damp wall. Positioning it in the centre of the treated area often ensures optimal distribution of the geomagnetic field.
💨 Ventilation
-
Ensure adequate ventilation in the home
-
Install an MVHR/VMC system if necessary
-
Check that doors are correctly undercut (1.5–2 cm)
-
Add window vents if needed
🧱 Preparatory work
-
Remove waterproof coatings at the base of the wall (10 cm above damp marks)
-
Wait 18 to 24 months for complete drying before any renovation
🧼 Wall restoration
-
Brush off surface salts
-
Redo renders with a lime mortar and an anti-salt additive for long-lasting protection
🌧 Drainage (in case of lateral infiltration)
-
Install a perimeter drain to prevent water build-up around the foundations
⚠️ Important note
It is designed to treat rising damp only. It does not replace:
-
Waterproofing against water infiltration coming from cracks or slopes
-
Managing damage related to flooding
-
Treating mould already present on the surface
➡️ These issues must be treated separately to ensure complete protection.
Frequently asked questions about ATG LC30
What type of damp is ATG LC30 intended for?
ATG LC30 is a geomagnetic device offered for walls affected by identified rising damp. It does not replace repairing a leak, addressing water ingress or resolving condensation.
What does the stated 30 m diameter mean?
The manufacturer states a coverage diameter of 30 m, equivalent to a 15 m radius around the device. This is not a floor area in square metres. Consider the distances to the affected walls and the layout of the building.
Does ATG LC30 need electricity?
No. ATG LC30 belongs to the ATG geomagnetic range and operates without an electricity supply. Its positioning and installation requirements still apply.
How should I prepare to install ATG LC30?
Read the manual for ATG LC30 before installation. It explains the mounting surface, positioning and precautions. Use fixings suitable for the wall and follow the manufacturer’s instructions.
How does it differ from the other models?
ATG LC15 has a stated diameter of 15 m and ATG LC30 of 30 m. Both operate without electricity. ATE devices use mains-powered electromagnetic technology. Compare coverage and installation requirements when choosing.
Where can I find the ATG LC30 manual and specifications?
The English manual for ATG LC30 is linked below. Also check the product reference and finish on the shop page before ordering.
| Weight | 1.4 kg |
|---|






