Humidistop ATE LC30

ATE wall drying devices for rising damp: a guide for professionals

November 17, 2026
Humidistop ATE LC15

ATE devices without resin injection: prepare your rising damp offer

November 17, 2026
Humidistop ATE LC30

ATE wall drying devices for rising damp: a guide for professionals

November 17, 2026
Humidistop ATE LC15

ATE devices without resin injection: prepare your rising damp offer

November 17, 2026
Show all

Damp walls before renovation: prepare an ATE proposal for your customer

A customer wants to redecorate a room with damp marks at the base of its walls. Before pricing the finishes, build a proposal that separates the moisture problem, any suitable equipment and the later renovation work. Help Humidité Pro presents ATE devices for projects involving rising damp.

Record the starting condition

Photograph the affected areas and note the wall materials, existing coatings and recent alterations. Establish the origin of the moisture before choosing a treatment. Where there are leaks, rainwater defects or condensation, include the relevant investigation or repair in the overall plan.

Explain the sequence of work

Describe why an ATE model is being considered and where it could be fitted. Then distinguish installation from the drying period and from the finishing work. Fitting a device does not establish that the substrate is already ready for new plaster or paint.

Agree what will be checked

Keep dated observations and comparable measurements where these are part of the service. State who carries out the checks and what is included in the quotation. Plan the finishes around the actual condition of the wall, including salts and coating compatibility, rather than a date copied from another building.

ATE models at a glance

Model Announced coverage diameter Power supply
ATE LC15 15 m Mains power
ATE LC30 30 m Mains power
ATE LC30 PULSE 30 m Mains power
ATE MAX 60 m Mains power

Check the specification and instructions for the exact model before ordering. ATG devices belong to a different, geomagnetic range and operate without an electrical supply.

Questions customers often ask

Does an ATE device address every cause of damp?

No. ATE devices are intended for rising damp. Leaks, penetrating damp and condensation need an appropriate response to their own cause.

Can the walls be painted immediately after fitting?

Installation alone does not show that a wall is dry. Assess the substrate, salts and the suitability of the finish before decorating.

Explore Help Humidité Pro for professionals or discuss your project.