ATE LC15 Light Grey

🏠 ATE LC15 Light Grey – Electromagnetic device for wall drying

Electronic wall drying: an innovative solution

Wall dampness is often caused by rising damp, a natural phenomenon where ground moisture rises through porous materials such as brick, stone, or mortar. This issue affects many buildings, especially those that were built without an adequate waterproof barrier.

It is an electromagnetic anti-damp device designed to gradually dry damp walls. Compact and made in France, it works without chemicals and without destructive construction work. It acts directly at the source of the problem thanks to electromagnetic polarity inversion.

📘 ATE LC15 User Manuals

Download the installation manual in your language:

French – Download the manual
English – Download the manual
German – Download the manual
Italian – Download the manual
Portuguese – Download the manual
Spanish – Download the manual

⚙️ How does the ATE LC15 work?

Damp walls generate a natural electrical potential that encourages water to rise. The device emits low-level electromagnetic waves that alter the polarity of water molecules. Moisture is then gradually pushed back down toward the ground and evaporates naturally, without damaging the wall structure.

✅ Key benefits of the ATE LC15 Light Grey

💧 Progressive, long-lasting wall drying
⚡ Coverage radius: 7.5 m (15 m diameter)
🔇 Silent operation, no vibration, no maintenance
♻️ Extremely low power consumption: only 0.75 W (~€15/year)
🔒 Certified safety: safe for people, animals, and plants
🇫🇷 Made in France – 10-year warranty
📦 Fast, free delivery

📦 Technical specifications

Dimensions: 322 x 232 x 32 mm
Power supply: 12 V
Power consumption: 0.75 W
Coverage radius: 7.5 m (15 m diameter)

Certifications:
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
WEEE Directive 2012/19/EU
EMF tested (non-harmful waves) – Emitech Laboratory

🛠️ Installation recommendations

Mount the device between 30 cm and 1 m above the floor
Install on a damp load-bearing wall (never on dry partitions or stud walls)
Keep at least 1.50 m away from major electronic devices
Picture-frame style mounting – wall-mounted and permanently plugged in
Check that the 15 m diameter properly covers the area to be treated

💡 Tips for better results

🔧 Remove waterproof coverings (paints, renders) 10–20 cm above the damp area
💨 Ensure good ventilation: keep air vents open, and undercut interior doors by 1.5–2 cm
🧱 After drying, brush off surface salts, then apply a lime-based render with an anti-salt additive
🌧 If there is pressurized lateral water ingress, plan suitable drainage around the building

📅 Expected results

With correct installation and by following the recommendations, wall drying is generally observed within 18 to 24 months, depending on the structure and the moisture level.

⚠️ Please note

This device does not treat:
❌ active water ingress
❌ flooding
❌ existing mold

➡️ These issues must be addressed separately to ensure long-term effectiveness.